Name: Metal solid tire repair tool
Metal material, polished, rust better
Correct use of tape instructions:
When you find out the leaks, make sure that the following points are made:
1. Tire the tire piercing part of the ring mark, pull out the puncture.
2. With the tire repair probe to detect the direction of penetration through the hole, along the direction of the hole into the twitch to remove dust within the hole debris.
3. Cut one end of the strip into an oblique mouth and insert it into the front end of the pin tool so that the length of the strip at both ends of the eye is basically the same.
4. Insert the pins with the strips into the tires along the holes to ensure that the strips are inserted in the 2/3 length (you must make sure that the cold strips penetrate the carcass and avoid inflating) and rotate the pins by 360 degrees Out of pin.
5. The remaining tire in the tire outside the tire, do not need to cut off, automatically flat on the line.