OTR tires grilled tire machine, is a grill large tire machine. Grilled passenger cars, trucks and agricultural vehicles. Tires for industrial use. Hydraulic system, only a perfect disassembly people tire, low labor intensity, high efficiency. Removable low voltage control operate handle. Voltage stability and safe operation.
1. for passenger cars, trucks, agricultural vehicles and industrial vehicles deep fluted rims, tubeless tyre and tire pressure ring Assembly and disassembly.
2. tyre arm automatic landing and move back and forth.
3. tyre remover tool to rotate disc spindle of the tool head, rolling bearing design.Even tire resistance during operation circumstances, can rotate freely.
4. equipped with hydraulic drive sockets on the tyre changer to move around without people.
5. the lightweight, portable work station, convenient operation, all angles in case of misuse.
6. two-speed spindle motor, improve the efficiency of the tyre.
7. the lifting cylinder is braced, equipped with safety switches.
Ready to work
1, the grilled tire lubrication ready before.
2, grilled tire before you is the machine voltage.
3, fixed before grilled tire steel rim.
Bead tires remove
1. move the tire to the top four-jaw universal Chuck.
2. adjust the machine, four-jaw universal Chuck round steel tire fixed.
3. apply good Lube mobile mounting arm to the side of the tire bead with mounting plate to tires and rotating the tires and steel rim completely out.
4. with diao taking leads, layering layering, assembling Panel trim Strip spin out.
5. the Assembly arm moves to the tires on its side, rotating the tires to move Assembly, valve outer protection.
Bead tires installed.
1. manual mount the tire on steel rim.
2. the lateral arm Assembly and move to the tire and tire with the Assembly disc close.
3. the Assembly plate steel pressure mounted.
Frequently asked questions:
1. If accidentally a small tire, you can use the break at butter.
2. grilled tire tire tire side scraped piece by piece, first machine head good grilled tire, tire wear when using professional hydraulic tyre bead coated evenly.
3. tire tires easy slide out, places must have been pressed down at the beginningand close to most of the in the Groove.
4. grill the bead of the tire machine is easily chop bad tires, the general problem is insufficient lubrication.